Acrylic plastic machine in plastic character principle 
 Plastic molding technology that plastic sheet (board) material hot molding technology, plastic processing industry technology in the second one. It differs from injection molding, extrusion and other primary processing, not for heating the particles of plastic resin or molding or die with the same cross-section through a continuous molding; nor is the use of machine tools, cutting tools and other mechanical processing methods, a portion of the plastic material cutting down, get the required shape, size, but against the plastic sheet (board) material, for heating, the use of molds, vacuum or pressure to film (plate) material deformation, the required shape and size, combined with supporting processes to achieve the application purposes. 

 Acrylic plastic molding machine equipment, including clamping systems, heating systems, vacuum and compressed air systems, and mold and other parts 
 Plastic thermoforming many ways, in accordance with molding molding and power can be divided into two major categories of differential pressure forming. According to mold, can be divided into single-positive mode, a single female mold, the mold, no mold in ways few other 
 Acrylic plastic machine springs excellent quality and reasonable price, comes with a full set of acrylic plastic machine parts equipment, major equipment, parts and labor warranty for one year free maintenance, Hebei Jinquan Acrylic Plastic Equipment Factory is a regular plastic machine manufacturers, has a perfect service system, free on-site installation training. 

 Chris blister machine how to use it, the word method of making plastic blister word processing, the main principle is hard flat plastic sheet softened after heating, the use of vacuum on the mold surface, cooling after molding, are widely used in plastic packaging, lighting, advertising, decoration and other industries. Made of acrylic board surface finish, outdoor UV ability, general high-purity acrylic colored plate in 8-10 years will not fade outdoors. Since 1942 after the birth in the United States, is widely used all walks of life. Blister machine operating procedures advertising production industry 

 First, the operating procedures 
 1, check whether it is normal to place plastic film (plastic film or installation) 
 2, turn the power switch; 
 3, check the machine is functioning properly 
 4, see heating wire is disconnected 
 5, the surface of the machine product removal and clean up the dust exhaust port. 
 6, adjust the heating temperature and the plastic in seconds. 
 7, the plating on the iron on the product. 
 8, press the heat button (Note: the button is pressed after heating 20cm away from the machine outside the orbit of any items prohibited to enter) 
 9, until the machine parallel to the heating of the product after taking the time out, and then use a knife to cut plastic film. 
 10, the surface layer of the product by hand gently tear off adhesive (Note: Do not Tear the process to avoid contact with contaminated fingers) 
 11, the finished product tear neatly folded and neatly decorated with a knife edge. 
 12, will deliver products to the plating room 
 13, after completion of switching off the machine, cut off the power.